APPLICATION OF DRY ABRASIVE MACHINING AND EXPERIMENTAL SELECTION OF MATERIALS FOR FINISHING OF CLOSED-TYPE BLADES

  • Yu. Shashko Oles Honchar Dnipro National University, Flight Control Propulsion
  • S. Adzhamsky Additive Laser Technology of Ukraine
  • S. Kazeev Flight Control Propulsion
  • R. Maksimchuk Flight Control Propulsion
  • A. Kulik Oles Honchar Dnipro National University
Keywords: ROUGHNESS, BLASTING, 3D PRINTING, ADDITIVE TECHNOLOGIES, BLADES, ABRASIVE MATERIALS, ABRASIVE BLASTING

Abstract

The use of additive technologies for the production of parts in aircraft and rocket manufacturing is becoming more widespread every year, since this method has a number of significant advantages over traditional technologies such as stamping, casting and machining and is considered as an alternative manufacturing method. The application of this method makes it possible to manufacture various parts of rocket and space technology, first of all, impellers of turbines with closed-type blades on one type of equipment in a much shorter time. However, despite the significant advantages of additive technologies, the problem of roughness and ensuring the final surface quality, regardless of the spatial arrangement of the part elements, remains relevant. The reason for this is limited access to traditional cutting tools such as milling cutters or grinding heads. Until now, the traditional technology for processing such parts such as closed blades has been the method of electrical discharge machining (ESM), however, this method has a number of significant disadvantages, such as: energy costs, the complexity of preparing the process, the complexity of tool manufacturing and processing implementation. The purpose of the work was to study the possibilities of using jet-abrasive processing and its varieties (blasting) and the selection of abrasive material to ensure the required quality and roughness of the surface of the blades. This article presents the results of experimental work on the study of a single short-term mechanical action of abrasive materials in a compressed air environment on material samples from the Inconel 718 alloy at certain angles of attack. The results obtained will be used in the development of a real technological process for processing the flow parts of closed-type blades and subsequent implementation in production.

Author Biographies

Yu. Shashko, Oles Honchar Dnipro National University, Flight Control Propulsion

Шашко Юрій Анатолійович. Україна. Дніпровський національний університет імені Олеся Гончара. Аспірант; інженер технолог «Flight Control LLC»
Сфера інтересів - технології виробництва літальних апаратів, адитивні технології

S. Adzhamsky, Additive Laser Technology of Ukraine

Аджамський Сергій Вікторович.
Україна
PhD, LLC «Additive Laser Technology of Ukraine»; технічний директор Сфера інтересів - адитивні технології

S. Kazeev, Flight Control Propulsion

Казєєв Сергій Володимирович.
Україна .«Flight Control LLC»; головний технолог Сфера інтересів – технології машинобудування

R. Maksimchuk, Flight Control Propulsion

Максимчук Роман Федосійович Керівник відділу турбонасосних агрегатів КБ « Flight Control LLC» Сфера інтересів – конструювання та проектування турбонасосних агрегатів

A. Kulik, Oles Honchar Dnipro National University

Кулик Олексій Володимирович Україна. Дніпровський національний університет ім. Олеся Гончара. Кандидат технічних наук. Доцент кафедри технології виробництва Сфера інтересів - технології виробництва літальних апаратів, аерокосмічна техніка

References

Ю.А. Шашко, О.В. Кулик, С.В. Казєєв, С.В. Аджамський Аналіз можливості та перспективи використання методу бластінгу при чистовій обробці закритих лопаток моноколіс турбін , виготовлених адитивним методом за технологією SLM.: Вісник Дніпровського університету серія: ракетно-космічна техніка, No4, випуск 24 2021. С. 132-137.

Горбатов И.В. Орлов Ю. А., Антюфев В. А., Тельгерекова Т. В., Орлова Н. Ю. Определение геометрической точности и шероховатости поверхности малогабаритных деталей круглого и квадратного сечения, получаемых в зависимости от расположения в рабочем пространстве принтера по технологии селективного лазерного плавления из стали марки 12Х18Н10Т: Вестник Концерна ВКО «Алмаз – Антей», No1, 2019. С. 59-67.

Аджамский, С.В. Песрпективы применения аддитивных технологий в авиа и ракетостроении [текст] / С.В. Аджамский, А. А. Кононенко, Р. В. Подольский// Авіаційно-космічна техніка і технологія. – 2020. - No7 (167). – С. 59-65. DOI: 10.32620/aktt.2020.7.09

Елизаров Д. Б., Полянский С.Н., Бутаков С.В. Применение струйных технологий в производстве. Инновационные технологии в науке и образовании: материалы VII Междунар. науч.-практ. конф. (Чебоксары, 24 июля 2016 г.). редкол.: О.Н. Широков [и др.]. Чебоксары. 2016. С. 180-182

http://gravitukraine.com/news/piskostr umienievie-ochishchiennia-povierkhon_n (дата звернення 05.06.2022).

Andreas W. Вlasting and Coating of Steel Structures: Germany. 2018. 205 с.

DOI 10.1016/B978-1-85617-395-7.X5000-8.

Елизаров Д. Б. Применение струйных технологий в производстве [Текст] / Д.Б. Елизаров, С.Н. Полянский, С.В. Бутаков // Инновационные технологии в науке и образовании : материалы VII Междунар. науч.-практ. конф. (Чебоксары, 24 июля 2016 г.) / редкол.: О.Н. Широков [и др.] – Чебоксары: ЦНС «Интерактив плюс», 2016. – 180-182 с.

Published
2023-02-23
How to Cite
Shashko, Y., Adzhamsky, S., Kazeev, S., Maksimchuk, R., & Kulik, A. (2023). APPLICATION OF DRY ABRASIVE MACHINING AND EXPERIMENTAL SELECTION OF MATERIALS FOR FINISHING OF CLOSED-TYPE BLADES. Journal of Rocket-Space Technology, 30(4), 51-56. https://doi.org/10.15421/452208
Section
Production technologies and materials