DEVELOPMENT PROSPECTS OF 3D-PRINTING OF OBJECTS IN AVIATION AND AEROSOACE FROM POLYMER MATERIALS WITH COMPOSITE REINFORCEMENT

  • M. Sirenko Oles Honchar Dnipro National University
  • E. Karpovych Oles Honchar Dnipro National University
Keywords: MATERIALS, COMPOSITES, 3D-PRINTING, ADDITIVE TECHNOLOGIES, REINFORCEMENT, FIBER

Abstract

The development of means of additive manufacturing and manufacturing of products is also used in aviation and rocket and space technology. Additive manufacturing makes it possible to improve the mass coefficients of parts and assemblies, to give parts shapes and features that are difficult to implement using traditional production methods. The choice of new types of production is reflected not only in the improved technical characteristics of devices and flying objects, but also in their design, which adapts to the conditions of additive manufacturing of details and parts. In the absence of obstacles and limitations of traditional production methods, it becomes possible to fully use the advantages of spatial and topological optimization of parts and structures. This article examines the main features and market trends associated with the introduction of additive manufacturing and 3D printing methods with an increase in the scope of their application. Existing models of equipment present on the market were analyzed. The peculiarities of the types of reinforcement, their influence on the characteristics of the final product and the requirements for the equipment on which the parts will be printed with the appropriate types of plastics were considered. Based on these trends, the materials with the greatest potential for more mass application and the equipment compatible with these materials were analyzed. Materials with different types of reinforcement were considered and analyzed, and their characteristics and advantages were given. Based on the analysis, the recommendations on the optimal choice of material and the state of the market of materials and equipment were presented in the conclusions. Also, recommendations were given for upgrading home or amateur-class 3d printers for printing with such reinforced plastics.

Author Biographies

M. Sirenko, Oles Honchar Dnipro National University

Сіренко Максим Костянтинович. Україна. Дніпровський національний університет імені Олеся Гончара. Аспірант. Сфера інтересів – 3D-друк, 3D- моделювання, інженерний аналіз методом кінцевих елементів.

E. Karpovych, Oles Honchar Dnipro National University

Карпович Олена Володимирівна. Україна. Дніпровський національний університет імені Олеся Гончара. Кандидат технічних наук. Доцент кафедри технології виробництва. Сфера інтересів – 3D друк деталей, зварювання матеріалів та споріднені процеси.

References

Обзор высокотемпературных FDM- пластиков для промышленной 3D-печати // Хабр. URL: https://geektimes.ru/company/top3dshop/blog/ 297171/ (дата звернення: 10.09.2022).

Frost & Sullivan: технологии аддитивного производства – рынок, тенденции и перспективы до 2025 года // 3Dtoday. URL: http://3dtoday.ru/blogs/news3dtoday/frost- sullivan-additive-manufacturing-technologies- market-trends-and-p/ (дата звернення: 10.09.2022).

Nylon 12 Carbon Fiber // Stratasys. URL: https://www.stratasys.com/nylon12cf (дата звернення: 10.09.2022).

FDM Nylon 12 Carbon Fiber // Javelin, a TriMech Company. https://www.javelin- tech.com/3d/stratasys-materials/fdm-nylon- 12cf/ (дата звернення: 10.09.2022).

Structural PEEK components for the aerospace sector // Roboze: professional and industrial 3D printers design and production URL: https://www.roboze.com/en/resources/structur al-peek-components-for-the-aerospace- sector.html (дата звернення: 10.09.2022).

Continuous Carbon Fiber - High Strength 3D Printing Material // Markforged. URL: https://markforged.com/materials/continuous- fibers/continuous-carbon-fiber (дата звернення: 10.09.2022).

Markforged предлагает доступный 3D-принтер для печати углеволоконным композитом Onyx // 3Dtoday. URL: http://3dtoday.ru/blogs/news3dtoday/markforg ed-offers-affordable-3d-printer-to-print- carbon-fiber-composit/ (дата звернення: 10.09.2022).

Continuous carbon fiber 3D printing from composite materials experts // Anisoprint. URL: https://anisoprint.ru/ (дата звернення: 10.09.2022).

Здесь можно купить карбон, карбон- кевлар, стеклоткань, полиэфирные и эпоксидные смолы а так же все расходные материалы для производства композитных изделий. // INTER-COMPOSITE. URL: http://inter-composite.com (дата звернення: 10.09.2022).

Published
2023-02-23
How to Cite
Sirenko, M., & Karpovych, E. (2023). DEVELOPMENT PROSPECTS OF 3D-PRINTING OF OBJECTS IN AVIATION AND AEROSOACE FROM POLYMER MATERIALS WITH COMPOSITE REINFORCEMENT. Journal of Rocket-Space Technology, 30(4), 9-14. https://doi.org/10.15421/452202